Honda CB550F needs work

Need Details
Hide
Category Auto Repair & Services
Title Honda CB550F needs work
Description I have a 1977 Honda CB550F which is in very good condition. But I have a few issues which need to be fixed and hence this post. The issues that need work are:

1. The starter switch gets stuck inside, and needs to replaced.
2. Change the bearings on the steering
3. The cylinders are leaking oil, and so the gaskets need to be replaced. Also,
when doing so clean up the cylinders and the pistons.
4. Change the fork dust caps, and replace the fork oil
5. Clean up the carburettors and tune up the bike.

I will provide all the spares needed, some of which I already own. I could show the bike. Please provide the number of hours required to do this work and your hourly rate. I could also help you design, create and host a website/webpage in return for your services. I am a professional web software designer/developer. A barter would be very acceptable.

Thanks

Preferred Start Date: Within 1 week after bidding is closed
Posted date 05/23/08 01:01 PM
Estimated Budget ($) 200-500
Status Bidding Closed
Contract Type Hourly or Fixed Rate
Proposals 0 Bid
Service Location Seattle, Washington


Advice & Recommendations
Hide
# From Message Submitted Actions
1 Realisticly,your looking at about 20 hours of work, possibly more depending on what I find when I pull it appart. Has it been sitting for a while? I may be able to save you some money on the parts, depending on what you already have and what's needed. My normal labor rate is $50.00 per hour, I may be open to some kind of trade but right now since business is always slow this time of year cash would be best. I have extensive experience on motorcyles and used to race Flat Track back in the 70's and always built and maintained my own equiptment. Please let me know if you would like me to have a look at what you have and give you a free consultation. Thanks, Dr John 206-420-3651 Hm, or 206-554-9473 Cell. 23.05.2008 Life Saver (0)
Funny (0)
Useless (0)